Reach new heights safely with our EWP course
Our Licence to Operate a Boom-Type Elevating Work Platform (EWP) 11m+ course gives you the hands-on skills and confidence to safely operate boom lifts and scissor lifts at height. You’ll gain hands-on experience with correct operating procedures, pre-start checks, hazard identification, and safe work practices - all through realistic, workplace-focused scenarios.
This nationally recognised qualification is ideal for anyone working in construction, maintenance, electrical, or related industries. By the end of the course, you’ll have the skills and confidence to operate EWPs safely, efficiently, and in full compliance with workplace safety regulations
Course Delivery
Face-to-Face
Course Duration
2-3 days
Nationally Recognised
Locations
Multiple training centres across Queensland and Western Australia, or we can come to your location.
Course Fee
Fees vary depending on location (see table below)
Afterpay available
Funding
CSQ and CTF funding available
Course Delivery
Face-to-Face
Course Duration
2-3 days
Nationally Recognised
Locations
Multiple training centres across Queensland and Western Australia, or we can come to your location.
Course Fee
Fees vary depending on location (see table below)
Afterpay available
Funding
CSQ and CTF funding available
Licence to Operate a Boom-Type EWP 11+ metres (TLILIC0005) - Course Information
The Licence to Operate a Boom-Type Elevating Work Platform (EWP) 11m+ course provides you with the practical knowledge and hands-on experience to safely operate a boom lift and scissor lift at heights of 11 metres or more. You’ll learn about:
Legislation & Compliance: Understand WHS and workplace requirements for operating elevated work platforms.
Hazard Identification: Recognise hazards and risks when working at height.
Risk Assessment & Planning: Plan safe operations and implement control measures before use.
Pre-Start Checks & Maintenance: Inspect boom lifts and scissor lifts and perform routine safety checks.
Safe Operating Procedures: Operate EWPs efficiently while minimising risks to yourself and others.
Load Handling & Work Positioning: Safely handle materials and position platforms for tasks at height.
Emergency Procedures & Rescue: Respond effectively to incidents, including emergency lowering procedures.
Shutdown & Storage Procedures: Secure the EWP safely after operations.
Communication & Reporting: Report hazards, incidents, and maintenance issues in line with workplace procedures.
By the end of the course, you’ll be confident in your ability to operate an EWP safely, manage hazards, and comply with workplace safety standards.
Course Delivery and Assessment
Due to the high-risk nature of operating an Elevating Work Platform (EWP) at heights, the Licence to Operate a Boom-Type EWP (11m+) course is delivered face-to-face over three full days. You’ll gain hands-on experience in a controlled environment, building both confidence and competence while receiving direct guidance and personalised feedback from experienced trainers throughout the course.
High Risk Work Licences
After successfully completing this course, you can apply for your High Risk Work Licence (HRWL). You have 60 days from course completion to submit your application. HRWLs are valid for five years and can be applied for or renewed online via the WorkSafe QLD or WorkSafe WA websites. If your licence expires, you are no longer recognised as a licensed operator until it is renewed. WorkSafe provides a 12-month grace period for renewal; if this period passes, you will need to resit both the written and practical assessments.
If you are one of our corporate clients, we can apply for the licence on your behalf for an additional fee of $160 (which includes the WorkSafe fee).
Who Should Complete This Course?
This course is designed for people who want to enter or progress in the construction, maintenance, or mining industries, those who need a High Risk Work Licence to operate an elevated work platform over 11m, or anyone looking to improve safety and efficiency when working at heights.
Ideal for:
Construction and maintenance personnel
Mining and resources workers
Operators and tradespeople required to use EWPs such as electricians, painters etc
Workers needing to meet organisational compliance
Whether you’re starting a new role or upskilling, this course will teach you how to operate an EWP safely, efficiently, and in full compliance with workplace regulations.
Course Outcome
Upon successful completion of this course, you will be awarded a nationally recognised Statement of Attainment for:
TLILIC0005 - Licence to Operate a Boom-Type Elevating Work Platform (EWP) 11m+
This unit is nationally recognised under the Australian Qualifications Framework (AQF) and contributes to the skills and competencies required for elevating work platform (EWP) work. Successful completion can support your application for the relevant High Risk Work Licence (HRWL) class, subject to meeting the applicable licensing requirements and assessment processes.
Career Pathways
Completing the 11m+ Elevating Work Platform (EWP) licence opens up a range of opportunities across construction, mining, maintenance, and industrial sectors where working at height is required.
Construction and Civil Works: EWP operator, trades assistant, site crew member, maintenance technician, leading hand.
Mining and Resources: EWP operator, plant operator, maintenance crew member, shutdown worker, safety-focused site roles.
Facilities & Maintenance: Building maintenance technician, access equipment operator, facilities support, industrial maintenance worker.
Warehousing and Industrial: Warehouse maintenance staff, access operator, logistics support, production support operator.
Events & Infrastructure: Rigging assistant, staging and setup crew, lighting and AV support, temporary structure installation.
Holding an 11m+ EWP licence (WP) allows you to legally operate boom-type elevating work platforms, making you a valuable asset on-site. It also supports career progression into higher-risk roles, supervisory positions, and specialised access work across multiple industries.
Entry Requirements
You must satisfy each of the following criteria to enrol in this course:
You must be at least 18 years old (a requirement for High Risk Work Licences).
Wear steel-capped or safety boots to your session and PPE.
Have basic computer skills and internet access (for enrolment and communication).
Have sufficient language, literacy, and numeracy (LLN) skills to complete assessments.
Have a valid Unique Student Identifier (USI) - mandatory for all nationally recognised training. If you don't already have a USI, you can apply for one online at www.usi.gov.au or we can apply for one for you.
Support When You Need It
Throughout the duration of your course, you can access experienced industry professionals and support staff to guide you through the program. Our trainers are dedicated to helping you succeed and will be available to answer your questions and provide feedback on your progress. They will provide you with the guidance and support you need to fully understand the course material, as well as offer suggestions for further learning opportunities.
Funding is Available For this Course
Construction Skills Queensland
Eligible workers, employers, and job seekers in Queensland's building and construction industry can save up to 75-100% on courses, including, short courses, units of competency, and Certificate of Diploma qualifications. CSQ provides substantial funding, with a small student co-contribution usually required.
Construction Training Fund WA
Eligible apprentices, trainees, workers and business owners in WA's building and construction industry can save up to 70% on metro courses and 80% on regional courses with CTF funding. As an approved provider, we can handle the paperwork and claim process for you, so you only pay the gap while you upskill, get licences, and complete safety courses.
"The EWP course was everything I hoped it would be. The trainer kept it simple and explained things clearly, and by the end of the day I felt confident using the boom lift."
Upcoming Courses
Loading courses...
Showing - of courses Showing of courses
No courses found matching your filters.
Can't see a date or location that suits? We may still be able to help.
Some courses are available at additional locations, on request, or as group training for workplaces. Enquire now to discuss upcoming dates, nearby locations, waitlists, or group booking options.
Enquire nowNo courses available at this time. Check back soon!
$
-
-
-
-
spaces available
No courses found matching your filters.
Can't see a date or location that suits? We may still be able to help.
Some courses are available at additional locations, on request, or as group training for workplaces. Enquire now to discuss upcoming dates, nearby locations, waitlists, or group booking options.
Enquire nowNo courses available at this time. Check back soon!
- ...
Course FAQs
Fees vary depending on location - you can view specific location fees in the table above.
Yes - you may be eligible for either Construction Skills Queensland (CSQ QLD) or Construction Training Fund (CTF WA) subsidies for this course.
This course is delivered face-to-face over 2-3 days (depending on location and experience of students).
Yes, you must satisfy each of the following criteria to enrol in this course:
Must be at least 18 years old
Wear steel-capped or safety boots to your session and PPE
Basic computer skills and internet access (for enrolment and communication)
Sufficient language, literacy, and numeracy (LLN) skills to complete assessments
A valid Unique Student Identifier (USI) - mandatory for all nationally recognised training. If you don’t have one, you can apply at usi.gov.au or we can assist.
After successfully completing this course, you can apply for your High Risk Work Licence (HRWL). You have 60 days from course completion to submit your application. HRWLs are valid for five years and can be applied for or renewed online via the WorkSafe QLD or WorkSafe WA websites. If your licence expires, you are no longer recognised as a licensed operator until it is renewed. WorkSafe provides a 12-month grace period for renewal; if this period passes, you will need to resit both the written and practical assessments.
If you are one of our corporate clients, we can apply for the licence on your behalf for an additional fee of $160 (which includes the WorkSafe fee).
Your Statement of Attainment is typically issued within 3-5 business days after you successfully complete all assessments and all required enrolment, USI and payment requirements are satisfied.
Related Courses
Have Questions?
Our friendly support team is here to help. Whether you need course advice, enrolment support, or guidance during your training, we’re only a call or message away.
Speak with Our Team
Call us now and we'll connect you with the right training specialist for your needs.
Call 1300 248 457
Send Us an Enquiry
Fill out a quick form and we'll get back to you with the information you need.